HUB deployed separately

If you need to deploy the HUB separately, you can use the -- hub_only parameter in elkeidup. The specific steps are as follows:

1、Configure the target machine root user ssh ssh password-free login

If the deployment machine is local, you still need to configure the local password-free login, and the login time needs to be less than 1s. The following command can be used to verify that the output of the two date commands needs to be the same.

date && ssh root@{ip} date
# The output time difference should be less than 1s

2、Download the release product and configure the catalog

mkdir -p /root/.elkeidup && cd /root/.elkeidup
wget -O elkeidup.tar.gz && tar -xf elkeidup.tar.gz
chmod a+x /root/.elkeidup/elkeidup

3、Generate and modify config.yaml

If it is not a standalone deployment, please refer to the deployment resource manual to modify config.yaml

cd /root/.elkeidup
## Generate hub only configurations
./elkeidup init --host {ip} --hub_only
mv config_example.yaml config.yaml


cd /root/.elkeidup

# Command is interactive
./elkeidup deploy --hub_only

## status
./elkeidup status --hub_only

## undeploy
./elkeidup undeploy --hub_only

5、Visit the HUB front end

After a successful installation, executing cat /root/.elkeidup/elkeid_passwd will see the randomly generated passwords and associated URLs for each component.

elkeid_hub_frontendhub front-end account password
grafanagrafana account password
grafanagrafana address
elkeid_hub_frontendelkeid hub front-end address
elkeid_service_discoveryService Discovery Address

To access elkeid_hub_frontend, refer to the Elkeid HUB Quick Start Tutorial.

6、HTTPS configuration

Please refer to Elkeid https configuration documentation